RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YO8B-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO8B-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TRX*	Shelter*	Exterior*
1734955866	16.8 °C	-0.5 °C	-0.9 °C
1734955266	17.2 °C	-0.5 °C	-1.1 °C
1734954666	17.9 °C	-0.5 °C	-1 °C
1734954066	18.9 °C	-0.4 °C	-0.9 °C
1734953466	19.9 °C	-0.4 °C	-0.8 °C
1734952866	17.4 °C	-0.5 °C	-0.9 °C
1734952266	17.8 °C	-0.5 °C	-1 °C
1734951665	17.8 °C	-0.4 °C	-0.9 °C
1734951066	18.9 °C	-0.5 °C	-0.8 °C
1734950466	15.1 °C	-0.6 °C	-0.9 °C
1734949866	14.4 °C	-0.9 °C	-0.8 °C
1734949266	14.4 °C	-1.2 °C	-1.2 °C
1734948666	14.5 °C	-1.4 °C	-1.6 °C
1734948065	14.5 °C	-1.3 °C	-1.6 °C
1734947466	14.6 °C	-1 °C	-1.6 °C
1734946866	14.8 °C	-0.9 °C	-1.3 °C
1734946266	14.8 °C	-1.1 °C	-1.4 °C
1734945666	14.9 °C	-1.1 °C	-1.3 °C
1734945066	14.9 °C	-1.2 °C	-1.3 °C
1734944466	15 °C	-1.2 °C	-1.4 °C
1734943866	15.3 °C	-1.2 °C	-1.6 °C
1734943266	15.5 °C	-1.2 °C	-1.6 °C
1734942666	15.8 °C	-1.2 °C	-1.5 °C
1734942066	16.1 °C	-1.2 °C	-1.4 °C
1734941465	16.6 °C	-1.3 °C	-1.4 °C

*Used Equation Coefficients:

TRX: 0, 1, -100

Shelter: 0, 1, -100

Exterior: 0, 1, -100

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)