This is the latest recevied telemetry packets stored in our database for station/object SP9DLM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | TEMP1* | Dg1h* | Eff1h* | Value5* |
|---|---|---|---|---|---|
| 1734938264 | 13.8 Volt | 13 C | 160 Pkt | 82 Pcnt | 0 |
| 1734927461 | 13.88 Volt | 63.5 C | 140 Pkt | 79 Pcnt | 0 |
| 1734923862 | 13.88 Volt | 12.5 C | 150 Pkt | 83 Pcnt | 0 |
| 1734920261 | 13.88 Volt | 12.5 C | 160 Pkt | 83 Pcnt | 0 |
| 1734916661 | 13.88 Volt | 11 C | 150 Pkt | 84 Pcnt | 0 |
| 1734913061 | 13.88 Volt | 63.5 C | 160 Pkt | 85 Pcnt | 0 |
| 1734909462 | 13.88 Volt | 63.5 C | 150 Pkt | 85 Pcnt | 0 |
| 1734905863 | 13.88 Volt | 63.5 C | 180 Pkt | 85 Pcnt | 0 |
| 1734902261 | 13.88 Volt | 63.5 C | 210 Pkt | 86 Pcnt | 0 |
| 1734895062 | 13.73 Volt | 63.5 C | 170 Pkt | 82 Pcnt | 0 |
| 1734891462 | 13.8 Volt | 63.5 C | 170 Pkt | 81 Pcnt | 0 |
| 1734887862 | 13.88 Volt | 63.5 C | 230 Pkt | 84 Pcnt | 0 |
| 1734884263 | 13.8 Volt | 63.5 C | 230 Pkt | 82 Pcnt | 0 |
| 1734880662 | 13.88 Volt | 63.5 C | 240 Pkt | 84 Pcnt | 0 |
| 1734877063 | 13.73 Volt | 63.5 C | 220 Pkt | 84 Pcnt | 0 |
| 1734873463 | 13.88 Volt | 63.5 C | 180 Pkt | 81 Pcnt | 0 |
| 1734869863 | 13.88 Volt | 10.5 C | 220 Pkt | 80 Pcnt | 0 |
| 1734866264 | 13.88 Volt | 10.5 C | 210 Pkt | 78 Pcnt | 0 |
| 1734862663 | 13.88 Volt | 63.5 C | 230 Pkt | 79 Pcnt | 0 |
| 1734859063 | 13.88 Volt | 63.5 C | 260 Pkt | 83 Pcnt | 0 |
| 1734855466 | 13.88 Volt | 63.5 C | 240 Pkt | 80 Pcnt | 0 |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
TEMP1: 0, 0.5, -64
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)