RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

ON0LGE-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON0LGE-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734919929	13.5 Volt	910 Pkt	340 Pkt	80 Pcnt
1734919926	13.5 Volt	910 Pkt	340 Pkt	80 Pcnt
1734919627	14.03 Volt	920 Pkt	330 Pkt	80 Pcnt
1734919329	13.5 Volt	810 Pkt	280 Pkt	75 Pcnt
1734919327	13.5 Volt	810 Pkt	280 Pkt	75 Pcnt
1734919027	14.03 Volt	790 Pkt	270 Pkt	74 Pcnt
1734918727	13.58 Volt	740 Pkt	250 Pkt	71 Pcnt
1734918727	13.58 Volt	740 Pkt	250 Pkt	71 Pcnt
1734918427	14.03 Volt	750 Pkt	260 Pkt	71 Pcnt
1734918127	13.8 Volt	720 Pkt	250 Pkt	70 Pcnt
1734918127	13.8 Volt	720 Pkt	250 Pkt	70 Pcnt
1734917827	14.03 Volt	720 Pkt	240 Pkt	70 Pcnt
1734917528	13.5 Volt	740 Pkt	240 Pkt	71 Pcnt
1734917527	13.5 Volt	740 Pkt	240 Pkt	71 Pcnt
1734917227	14.03 Volt	720 Pkt	240 Pkt	69 Pcnt
1734916927	13.73 Volt	710 Pkt	230 Pkt	69 Pcnt
1734916927	13.73 Volt	710 Pkt	230 Pkt	69 Pcnt
1734916627	14.03 Volt	710 Pkt	230 Pkt	69 Pcnt
1734916329	14.03 Volt	690 Pkt	230 Pkt	69 Pcnt
1734916327	14.03 Volt	690 Pkt	230 Pkt	69 Pcnt
1734916027	14.03 Volt	680 Pkt	220 Pkt	68 Pcnt
1734915727	14.03 Volt	660 Pkt	220 Pkt	69 Pcnt
1734915727	14.03 Volt	660 Pkt	220 Pkt	69 Pcnt
1734915427	14.03 Volt	620 Pkt	210 Pkt	69 Pcnt
1734915127	13.8 Volt	590 Pkt	190 Pkt	71 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)