RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YU0XKS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YU0XKS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734954296	12.38 Volt	120 Pkt	50 Pkt	68 Pcnt
1734953996	12.38 Volt	120 Pkt	50 Pkt	68 Pcnt
1734953696	12.38 Volt	110 Pkt	40 Pkt	70 Pcnt
1734953396	12.38 Volt	110 Pkt	40 Pkt	70 Pcnt
1734953096	12.38 Volt	110 Pkt	40 Pkt	70 Pcnt
1734952796	12.38 Volt	110 Pkt	40 Pkt	72 Pcnt
1734952796	12.38 Volt	110 Pkt	40 Pkt	72 Pcnt
1734952496	12.38 Volt	120 Pkt	40 Pkt	74 Pcnt
1734952196	12.38 Volt	120 Pkt	30 Pkt	75 Pcnt
1734951896	12.38 Volt	130 Pkt	30 Pkt	75 Pcnt
1734951596	12.38 Volt	140 Pkt	30 Pkt	76 Pcnt
1734951296	12.38 Volt	140 Pkt	30 Pkt	78 Pcnt
1734950997	12.38 Volt	140 Pkt	30 Pkt	77 Pcnt
1734950996	12.38 Volt	140 Pkt	30 Pkt	77 Pcnt
1734950696	12.38 Volt	140 Pkt	30 Pkt	76 Pcnt
1734950396	12.38 Volt	130 Pkt	30 Pkt	76 Pcnt
1734950096	12.38 Volt	130 Pkt	30 Pkt	76 Pcnt
1734949796	12.38 Volt	130 Pkt	30 Pkt	77 Pcnt
1734949496	12.38 Volt	130 Pkt	30 Pkt	76 Pcnt
1734949196	12.38 Volt	120 Pkt	30 Pkt	75 Pcnt
1734949196	12.38 Volt	120 Pkt	30 Pkt	75 Pcnt
1734948896	12.38 Volt	120 Pkt	30 Pkt	75 Pcnt
1734948596	12.38 Volt	110 Pkt	30 Pkt	74 Pcnt
1734948296	12.38 Volt	100 Pkt	30 Pkt	72 Pcnt
1734947996	12.38 Volt	100 Pkt	30 Pkt	73 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)