RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

OE3CIN-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3CIN-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734956093	12.83 Volt	550 Pkt	10 Pkt	75 Pcnt
1734955793	12.83 Volt	550 Pkt	10 Pkt	75 Pcnt
1734955493	12.83 Volt	540 Pkt	0 Pkt	74 Pcnt
1734955369	12.75 Volt	30 Pkt	20 Pkt	5 Pcnt
1734955193	12.83 Volt	560 Pkt	0 Pkt	74 Pcnt
1734954893	12.83 Volt	580 Pkt	0 Pkt	73 Pcnt
1734954593	12.83 Volt	590 Pkt	0 Pkt	74 Pcnt
1734954293	12.83 Volt	590 Pkt	0 Pkt	74 Pcnt
1734953993	12.83 Volt	590 Pkt	0 Pkt	74 Pcnt
1734953693	12.83 Volt	580 Pkt	0 Pkt	74 Pcnt
1734953393	12.83 Volt	590 Pkt	0 Pkt	75 Pcnt
1734953093	12.83 Volt	610 Pkt	0 Pkt	76 Pcnt
1734952793	12.83 Volt	620 Pkt	0 Pkt	76 Pcnt
1734952493	12.83 Volt	630 Pkt	0 Pkt	77 Pcnt
1734952193	12.83 Volt	650 Pkt	0 Pkt	77 Pcnt
1734951893	12.83 Volt	640 Pkt	0 Pkt	77 Pcnt
1734951593	12.83 Volt	660 Pkt	0 Pkt	79 Pcnt
1734951293	12.83 Volt	680 Pkt	0 Pkt	80 Pcnt
1734950993	12.83 Volt	690 Pkt	0 Pkt	81 Pcnt
1734950693	12.83 Volt	680 Pkt	0 Pkt	81 Pcnt
1734950393	12.83 Volt	690 Pkt	0 Pkt	80 Pcnt
1734950093	12.83 Volt	680 Pkt	0 Pkt	80 Pcnt
1734949793	12.83 Volt	670 Pkt	0 Pkt	81 Pcnt
1734949493	12.83 Volt	660 Pkt	0 Pkt	80 Pcnt
1734949193	12.83 Volt	620 Pkt	0 Pkt	80 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)