RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

BX6ABV-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BX6ABV-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	CPUTemp*	RxPkts/20m*	RxPkts/1h*	RxPkts/24h*
1734969680	23.4 C	13 p	70 p	3611 p
1734968431	31.6 C	31 p	82 p	3608 p
1734967231	31.6 C	27 p	74 p	3607 p
1734966031	31 C	24 p	62 p	3605 p
1734964831	31.6 C	23 p	57 p	3603 p
1734963631	31.2 C	15 p	49 p	3606 p
1734962431	31.7 C	19 p	63 p	3621 p
1734961231	31.6 C	15 p	60 p	3634 p
1734960031	32.3 C	29 p	61 p	3684 p
1734958831	30.9 C	16 p	46 p	3735 p
1734957632	32.7 C	16 p	47 p	3803 p
1734956431	30.3 C	14 p	71 p	3873 p
1734955231	30.4 C	17 p	99 p	3942 p
1734954031	31.9 C	40 p	102 p	3984 p
1734952831	31.6 C	42 p	83 p	3970 p
1734951631	31.6 C	20 p	117 p	3960 p
1734950431	32.1 C	21 p	232 p	3968 p
1734949231	32 C	76 p	362 p	3993 p
1734948031	31.1 C	135 p	385 p	3948 p
1734946831	31.9 C	151 p	347 p	3878 p
1734945631	31.5 C	99 p	338 p	3793 p
1734944431	30.9 C	97 p	379 p	3775 p
1734943877	32.6 C	122 p	353 p	3771 p
1734942676	31.2 C	131 p	284 p	3735 p
1734942080	31.9 C	145 p	254 p	3715 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)