This is the latest recevied telemetry packets stored in our database for station/object KB9AIT-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719876712 | 452 | 632 | 0 | 0 | 0 |
1719876663 | 421 | 632 | 0 | 0 | 0 |
1719876640 | 408 | 632 | 0 | 0 | 0 |
1719876635 | 415 | 632 | 0 | 0 | 0 |
1719876590 | 414 | 632 | 0 | 0 | 0 |
1719876585 | 413 | 632 | 0 | 0 | 0 |
1719876475 | 455 | 631 | 0 | 0 | 0 |
1719876445 | 456 | 631 | 0 | 0 | 0 |
1719876440 | 459 | 631 | 0 | 0 | 0 |
1719876433 | 458 | 631 | 0 | 0 | 0 |
1719876429 | 456 | 631 | 0 | 0 | 0 |
1719876420 | 460 | 630 | 0 | 0 | 0 |
1719876415 | 455 | 631 | 0 | 0 | 0 |
1719876372 | 461 | 631 | 0 | 0 | 0 |
1719876235 | 457 | 630 | 0 | 0 | 0 |
1719876170 | 461 | 630 | 0 | 0 | 0 |
1719876152 | 458 | 630 | 0 | 0 | 0 |
1719876144 | 461 | 630 | 0 | 0 | 0 |
1719876139 | 458 | 630 | 0 | 0 | 0 |
1719876134 | 461 | 630 | 0 | 0 | 0 |
1719876094 | 458 | 630 | 0 | 0 | 0 |
1719876010 | 476 | 629 | 0 | 0 | 0 |
1719875935 | 476 | 628 | 0 | 0 | 0 |
1719875863 | 475 | 628 | 0 | 0 | 0 |
1719875832 | 473 | 627 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)