RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YB1TJ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YB1TJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1734968616	2 Pkt	-54 dBm	13.04 V
1734968293	3 Pkt	-55 dBm	13.04 V
1734967970	4 Pkt	-54 dBm	13.04 V
1734967647	3 Pkt	-55 dBm	13 V
1734967325	2 Pkt	-53 dBm	13.04 V
1734967002	1 Pkt	-52 dBm	13.04 V
1734966680	2 Pkt	-57 dBm	13.04 V
1734966358	4 Pkt	-53 dBm	13.08 V
1734966037	3 Pkt	-58 dBm	13.04 V
1734965713	5 Pkt	-52 dBm	13.04 V
1734965390	2 Pkt	-55 dBm	13.04 V
1734965067	4 Pkt	-51 dBm	13 V
1734964745	2 Pkt	-55 dBm	13.04 V
1734964423	4 Pkt	-53 dBm	13.04 V
1734964100	3 Pkt	-53 dBm	13.04 V
1734963778	3 Pkt	-52 dBm	13 V
1734963455	2 Pkt	-54 dBm	13.04 V
1734963133	1 Pkt	-52 dBm	13 V
1734962810	2 Pkt	-56 dBm	13.08 V
1734962488	3 Pkt	-56 dBm	13.04 V
1734962165	3 Pkt	-53 dBm	13 V
1734961842	1 Pkt	-55 dBm	13.04 V
1734961520	4 Pkt	-56 dBm	13.04 V
1734961197	3 Pkt	-63 dBm	13 V
1734960874	3 Pkt	-56 dBm	13.04 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)