RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YH0DVA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YH0DVA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1734980982	20 Pkt	0 Pkt	31 dBm	13.04 V
1734980658	13 Pkt	0 Pkt	31 dBm	13.06 V
1734980335	16 Pkt	0 Pkt	31 dBm	13.06 V
1734980012	26 Pkt	0 Pkt	31 dBm	13.04 V
1734979688	9 Pkt	0 Pkt	31 dBm	13.06 V
1734979364	17 Pkt	0 Pkt	31 dBm	13.04 V
1734979042	22 Pkt	2 Pkt	31 dBm	13.04 V
1734978718	13 Pkt	3 Pkt	31 dBm	13.06 V
1734978395	15 Pkt	3 Pkt	31 dBm	13.04 V
1734978072	24 Pkt	3 Pkt	31 dBm	13.06 V
1734977748	14 Pkt	3 Pkt	31 dBm	13.06 V
1734977425	9 Pkt	3 Pkt	31 dBm	13.04 V
1734977103	19 Pkt	3 Pkt	31 dBm	13.04 V
1734976779	14 Pkt	3 Pkt	31 dBm	13.04 V
1734976457	13 Pkt	3 Pkt	31 dBm	11.24 V
1734976134	18 Pkt	6 Pkt	31 dBm	13.04 V
1734975811	16 Pkt	2 Pkt	31 dBm	13.06 V
1734975488	17 Pkt	3 Pkt	31 dBm	13.06 V
1734975165	14 Pkt	6 Pkt	31 dBm	13.06 V
1734974842	11 Pkt	3 Pkt	31 dBm	13.04 V
1734974519	13 Pkt	3 Pkt	31 dBm	13.06 V
1734974196	19 Pkt	6 Pkt	31 dBm	13.06 V
1734973873	11 Pkt	3 Pkt	31 dBm	13.04 V
1734973551	17 Pkt	4 Pkt	31 dBm	13.04 V
1734972904	11 Pkt	3 Pkt	31 dBm	13.06 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)