RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

TA1JSS-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1JSS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1730442062	0 Pkt	-70 dBm	11.73 V
1730441369	1 Pkt	-67 dBm	11.69 V
1730440677	0 Pkt	-69 dBm	11.61 V
1730439984	1 Pkt	-67 dBm	11.67 V
1730439291	1 Pkt	-68 dBm	11.71 V
1730438599	2 Pkt	-68 dBm	11.69 V
1730437906	2 Pkt	-69 dBm	11.67 V
1730437214	2 Pkt	-68 dBm	11.63 V
1730436522	4 Pkt	-68 dBm	11.73 V
1730435830	6 Pkt	-66 dBm	11.67 V
1730435137	4 Pkt	-66 dBm	11.73 V
1730434444	7 Pkt	-67 dBm	11.71 V
1730433751	10 Pkt	-67 dBm	11.71 V
1730431280	6 Pkt	-68 dBm	11.73 V
1730430587	8 Pkt	-68 dBm	11.73 V
1730429894	5 Pkt	-67 dBm	11.69 V
1730429201	9 Pkt	-67 dBm	11.71 V
1730428508	3 Pkt	-68 dBm	11.69 V
1730427816	9 Pkt	-69 dBm	11.57 V
1730427123	4 Pkt	-68 dBm	11.69 V
1730426431	10 Pkt	-68 dBm	11.73 V
1730425738	6 Pkt	-67 dBm	11.67 V
1730425045	7 Pkt	-67 dBm	11.71 V
1730424352	9 Pkt	-65 dBm	11.69 V
1730423659	6 Pkt	-66 dBm	11.63 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)