RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

N3LLO-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N3LLO-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Rx10m*
1734903865	14.25 Volt	1240 Pkt	71 Pcnt	194 Pkt
1734903565	14.25 Volt	1230 Pkt	70 Pcnt	169 Pkt
1734903265	14.25 Volt	1240 Pkt	70 Pcnt	160 Pkt
1734902965	14.25 Volt	1270 Pkt	71 Pcnt	174 Pkt
1734902665	14.25 Volt	1270 Pkt	71 Pcnt	174 Pkt
1734902365	14.25 Volt	1290 Pkt	71 Pcnt	189 Pkt
1734902065	14.25 Volt	1300 Pkt	71 Pcnt	183 Pkt
1734901765	14.25 Volt	1290 Pkt	71 Pcnt	186 Pkt
1734901465	14.25 Volt	1290 Pkt	71 Pcnt	210 Pkt
1734901165	14.25 Volt	1290 Pkt	71 Pcnt	209 Pkt
1734900866	14.25 Volt	1290 Pkt	71 Pcnt	220 Pkt
1734900265	14.25 Volt	1260 Pkt	71 Pcnt	188 Pkt
1734899965	14.25 Volt	1290 Pkt	72 Pcnt	204 Pkt
1734899665	14.25 Volt	1300 Pkt	71 Pcnt	192 Pkt
1734899366	14.25 Volt	1310 Pkt	71 Pcnt	196 Pkt
1734899066	14.25 Volt	1330 Pkt	71 Pcnt	198 Pkt
1734897866	14.25 Volt	1350 Pkt	73 Pcnt	206 Pkt
1734897566	14.25 Volt	1350 Pkt	73 Pcnt	190 Pkt
1734897266	14.25 Volt	1340 Pkt	73 Pcnt	193 Pkt
1734896966	14.25 Volt	1340 Pkt	73 Pcnt	231 Pkt
1734896666	14.25 Volt	1330 Pkt	72 Pcnt	227 Pkt
1734896366	14.25 Volt	1300 Pkt	71 Pcnt	218 Pkt
1734896066	14.25 Volt	1310 Pkt	72 Pcnt	225 Pkt
1734895766	14.25 Volt	1280 Pkt	71 Pcnt	211 Pkt
1734895466	14.25 Volt	1250 Pkt	71 Pcnt	203 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Rx10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)