RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

TA1DRE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1DRE-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1736505906	2 Pkt	0 Pkt	-48 dBm	0.1 V
1736505583	0 Pkt	0 Pkt	-46 dBm	0.06 V
1736505261	0 Pkt	0 Pkt	-46 dBm	0.08 V
1736504939	2 Pkt	0 Pkt	-64 dBm	0.06 V
1736504447	3 Pkt	0 Pkt	-57 dBm	0.1 V
1736504123	2 Pkt	0 Pkt	-55 dBm	0.08 V
1736503801	5 Pkt	0 Pkt	-56 dBm	0.1 V
1736503477	5 Pkt	0 Pkt	-60 dBm	0.08 V
1736503154	2 Pkt	0 Pkt	-68 dBm	0.06 V
1736502831	3 Pkt	0 Pkt	-50 dBm	0.08 V
1736502507	15 Pkt	0 Pkt	-62 dBm	0.06 V
1736502180	11 Pkt	0 Pkt	-48 dBm	0.1 V
1736501852	4 Pkt	1 Pkt	-59 dBm	0.06 V
1736501522	8 Pkt	1 Pkt	-45 dBm	0.08 V
1736501194	5 Pkt	0 Pkt	-40 dBm	0.08 V
1736500867	1 Pkt	0 Pkt	-36 dBm	0.06 V
1736500335	5 Pkt	0 Pkt	-43 dBm	0.08 V
1736499984	6 Pkt	0 Pkt	-44 dBm	0.1 V
1736499658	0 Pkt	0 Pkt	-42 dBm	0.08 V
1736499208	0 Pkt	0 Pkt	-51 dBm	0.08 V
1736498886	1 Pkt	0 Pkt	-43 dBm	0.08 V
1736498564	1 Pkt	0 Pkt	-45 dBm	0.08 V
1736493134	3 Pkt	0 Pkt	-62 dBm	0.08 V
1736492812	0 Pkt	0 Pkt	-32 dBm	0.1 V
1736492442	0 Pkt	0 Pkt	-44 dBm	0.06 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)