RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

OE3XDC-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3XDC-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1730415453	12.08 Volt	0 Pkt	100 Pcnt	7 C
1730415153	12.08 Volt	0 Pkt	100 Pcnt	7 C
1730414854	11.93 Volt	0 Pkt	100 Pcnt	7.5 C
1730414553	12 Volt	0 Pkt	100 Pcnt	7.5 C
1730414258	11.93 Volt	0 Pkt	100 Pcnt	8 C
1730413953	11.93 Volt	0 Pkt	100 Pcnt	8 C
1730413653	12.08 Volt	0 Pkt	100 Pcnt	8 C
1730413353	12 Volt	0 Pkt	100 Pcnt	8 C
1730413053	12 Volt	0 Pkt	100 Pcnt	8.5 C
1730412754	11.93 Volt	0 Pkt	100 Pcnt	8.5 C
1730412453	11.93 Volt	0 Pkt	100 Pcnt	8 C
1730412153	11.93 Volt	0 Pkt	100 Pcnt	8 C
1730411853	11.93 Volt	0 Pkt	100 Pcnt	8.5 C
1730411553	11.85 Volt	0 Pkt	100 Pcnt	8 C
1730411253	12.08 Volt	0 Pkt	100 Pcnt	8.5 C
1730410953	11.85 Volt	0 Pkt	100 Pcnt	9 C
1730410653	11.93 Volt	0 Pkt	100 Pcnt	8.5 C
1730410355	12.08 Volt	0 Pkt	42 Pcnt	9 C
1730410053	11.93 Volt	40 Pkt	71 Pcnt	9 C
1730409754	12.15 Volt	60 Pkt	69 Pcnt	9 C
1730409453	11.85 Volt	90 Pkt	64 Pcnt	9 C
1730409153	11.93 Volt	130 Pkt	63 Pcnt	9.5 C
1730408853	12.08 Volt	150 Pkt	61 Pcnt	9.5 C
1730408553	11.93 Volt	190 Pkt	62 Pcnt	10 C
1730408253	11.93 Volt	220 Pkt	60 Pcnt	10 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)