This is the latest recevied telemetry packets stored in our database for station/object HK6L-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1731705934 | 3.18 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731705812 | 3.22 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731705666 | 3.27 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731705543 | 3.3 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731705419 | 3.32 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731704746 | 3.42 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731703844 | 3.54 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731703824 | 3.55 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731703299 | 3.59 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731703098 | 3.62 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731703089 | 3.61 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731702920 | 3.62 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731702577 | 3.64 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731701674 | 3.66 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731701551 | 3.66 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731701315 | 3.67 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731700638 | 3.68 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731699710 | 3.69 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731697904 | 3.71 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731694292 | 3.78 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731692491 | 3.82 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731691583 | 3.81 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731690680 | 3.83 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731689777 | 3.86 VDC<ÿ | 0 | 0 | 0 | 0 |
| 1731687971 | 3.92 VDC<ÿ | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)