RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

9M2WMW-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M2WMW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1734917842	0 Pkt	0 Pkt	0 Pkt	-64 dBm	18.83 V
1734916017	0 Pkt	0 Pkt	0 Pkt	-65 dBm	18.79 V
1734914192	0 Pkt	24 Pkt	0 Pkt	-64 dBm	18.81 V
1734912367	0 Pkt	22 Pkt	0 Pkt	-64 dBm	18.79 V
1734910540	0 Pkt	6 Pkt	0 Pkt	-64 dBm	18.76 V
1734908715	0 Pkt	1 Pkt	0 Pkt	-63 dBm	18.79 V
1734906889	0 Pkt	17 Pkt	0 Pkt	-64 dBm	18.79 V
1734905064	0 Pkt	0 Pkt	0 Pkt	-65 dBm	18.79 V
1734903239	0 Pkt	5 Pkt	0 Pkt	-64 dBm	18.79 V
1734901414	0 Pkt	6 Pkt	0 Pkt	-65 dBm	18.89 V
1734899589	0 Pkt	4 Pkt	0 Pkt	-66 dBm	18.91 V
1734897764	0 Pkt	4 Pkt	0 Pkt	-62 dBm	18.89 V
1734895938	0 Pkt	4 Pkt	0 Pkt	-64 dBm	18.91 V
1734894113	0 Pkt	4 Pkt	0 Pkt	-65 dBm	18.91 V
1734892288	0 Pkt	5 Pkt	0 Pkt	-64 dBm	18.95 V
1734890462	0 Pkt	3 Pkt	0 Pkt	-65 dBm	18.91 V
1734888637	0 Pkt	6 Pkt	0 Pkt	-65 dBm	18.91 V
1734886812	0 Pkt	3 Pkt	0 Pkt	-64 dBm	18.91 V
1734884986	0 Pkt	4 Pkt	0 Pkt	-64 dBm	18.99 V
1734883161	0 Pkt	4 Pkt	0 Pkt	-64 dBm	18.97 V
1734881336	0 Pkt	6 Pkt	0 Pkt	-65 dBm	18.97 V
1734879510	0 Pkt	7 Pkt	0 Pkt	-65 dBm	18.99 V
1734877685	13 Pkt	10 Pkt	1 Pkt	-64 dBm	18.99 V
1734875858	16 Pkt	1 Pkt	22 Pkt	-70 dBm	18.99 V
1734874025	44 Pkt	5 Pkt	7 Pkt	-69 dBm	18.99 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)