RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

HS5XHC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5XHC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TxTraffic*	RSSI*	Voltage*
1736481998	0 Pkt	-13 dBm	10.99 V
1736480188	0 Pkt	-13 dBm	11.01 V
1736478341	0 Pkt	-13 dBm	11.07 V
1736476531	1 Pkt	-13 dBm	11.03 V
1736474721	1 Pkt	-13 dBm	11.03 V
1736472911	0 Pkt	-13 dBm	11.01 V
1736471101	1 Pkt	-12 dBm	11.03 V
1736469291	0 Pkt	-14 dBm	11.01 V
1736467481	0 Pkt	-14 dBm	10.99 V
1736465671	1 Pkt	-21 dBm	10.99 V
1736463861	1 Pkt	-19 dBm	11.03 V
1736462051	0 Pkt	-21 dBm	11.01 V
1736460241	4 Pkt	-21 dBm	11.03 V
1736458431	7 Pkt	-21 dBm	10.99 V
1736456621	10 Pkt	-21 dBm	11.01 V
1736454811	7 Pkt	-21 dBm	11.03 V
1736453001	9 Pkt	-14 dBm	11.16 V
1736451677	13 Pkt	-13 dBm	10.99 V
1736449867	7 Pkt	-13 dBm	11.01 V
1736448057	9 Pkt	-14 dBm	10.99 V
1736446247	15 Pkt	-13 dBm	10.97 V
1736444437	11 Pkt	-13 dBm	10.97 V
1736442627	7 Pkt	-13 dBm	10.97 V
1736440817	16 Pkt	-13 dBm	10.93 V
1736439007	18 Pkt	-14 dBm	10.93 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)