RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

9M2MAD-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M2MAD-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1734979364	2 Pkt	28 Pkt	0 Pkt	-70 dBm	0.06 V
1734973935	1 Pkt	15 Pkt	0 Pkt	-72 dBm	0.06 V
1734968505	2 Pkt	0 Pkt	0 Pkt	-69 dBm	0.06 V
1734963076	8 Pkt	35 Pkt	1 Pkt	-70 dBm	0.06 V
1734957647	14 Pkt	45 Pkt	6 Pkt	-68 dBm	0.06 V
1734952216	88 Pkt	72 Pkt	29 Pkt	-70 dBm	0.06 V
1734946784	98 Pkt	87 Pkt	32 Pkt	-72 dBm	0.06 V
1734941350	116 Pkt	65 Pkt	22 Pkt	-74 dBm	0.06 V
1734927409	95 Pkt	39 Pkt	9 Pkt	-70 dBm	0.06 V
1734921977	110 Pkt	89 Pkt	41 Pkt	-75 dBm	0.06 V
1734916543	36 Pkt	73 Pkt	14 Pkt	-72 dBm	0.06 V
1734911112	26 Pkt	3 Pkt	1 Pkt	-73 dBm	0.06 V
1734905682	7 Pkt	2 Pkt	0 Pkt	-65 dBm	0.06 V
1734900254	0 Pkt	0 Pkt	0 Pkt	-67 dBm	0.06 V
1734896104	35 Pkt	40 Pkt	0 Pkt	-65 dBm	0.06 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)