This is the latest recevied telemetry packets stored in our database for station/object BV8SI-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | CPUTemp* | RxPkts/10m* | RxPkts/1h* | RxPkts/24h* | DiGi* |
---|---|---|---|---|---|
1719820860 | 56 C | 10 p | 73 p | 691 p | 0 p |
1719819660 | 54 C | 12 p | 108 p | 671 p | 0 p |
1719818460 | 56 C | 14 p | 148 p | 648 p | 0 p |
1719817260 | 54 C | 21 p | 138 p | 618 p | 0 p |
1719816060 | 54 C | 36 p | 101 p | 563 p | 0 p |
1719814860 | 55 C | 7 p | 64 p | 500 p | 0 p |
1719813659 | 55 C | 11 p | 66 p | 480 p | 0 p |
1719812460 | 54 C | 12 p | 68 p | 462 p | 0 p |
1719811260 | 55 C | 10 p | 64 p | 436 p | 0 p |
1719810060 | 53 C | 8 p | 79 p | 414 p | 0 p |
1719808860 | 55 C | 8 p | 97 p | 394 p | 0 p |
1719807660 | 54 C | 20 p | 103 p | 372 p | 0 p |
1719806459 | 54 C | 20 p | 90 p | 335 p | 0 p |
1719805260 | 55 C | 12 p | 71 p | 297 p | 0 p |
1719804060 | 55 C | 9 p | 66 p | 269 p | 0 p |
1719802860 | 54 C | 13 p | 64 p | 245 p | 0 p |
1719801659 | 54 C | 12 p | 68 p | 226 p | 0 p |
1719800460 | 54 C | 9 p | 74 p | 203 p | 0 p |
1719799260 | 54 C | 12 p | 86 p | 181 p | 0 p |
1719798060 | 54 C | 15 p | 105 p | 158 p | 0 p |
1719796860 | 54 C | 15 p | 99 p | 129 p | 0 p |
1719795659 | 54 C | 21 p | 93 p | 95 p | 0 p |
1719794460 | 52 C | 10 p | 53 p | 53 p | 0 p |
1719793260 | 54 C | 9 p | 30 p | 30 p | 0 p |
1719792060 | 53 C | 2 p | 2 p | 2 p | 0 p |
*Used Equation Coefficients:
CPUTemp: 0, 1, 0
RxPkts/10m: 0, 1, 0
RxPkts/1h: 0, 1, 0
RxPkts/24h: 0, 1, 0
DiGi: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)