This is the latest recevied telemetry packets stored in our database for station/object LANEMT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx1h* | Rx10m* | Dig1h* | Temp* | Vin* |
|---|---|---|---|---|---|
| 1734922603 | 570 Pkt | 77 Pkt | 20 Pck | 45.7 F | 13.8 Volt |
| 1734921403 | 570 Pkt | 103 Pkt | 10 Pck | 45.7 F | 13.8 Volt |
| 1734920203 | 570 Pkt | 92 Pkt | 10 Pck | 45.7 F | 13.8 Volt |
| 1734919003 | 550 Pkt | 79 Pkt | 0 Pck | 45.7 F | 13.8 Volt |
| 1734917804 | 530 Pkt | 86 Pkt | 10 Pck | 45.7 F | 13.8 Volt |
| 1734916603 | 570 Pkt | 88 Pkt | 20 Pck | 45.7 F | 13.8 Volt |
| 1734915403 | 600 Pkt | 78 Pkt | 30 Pck | 45.7 F | 13.8 Volt |
| 1734914204 | 650 Pkt | 100 Pkt | 50 Pck | 45.7 F | 13.8 Volt |
| 1734913004 | 630 Pkt | 98 Pkt | 40 Pck | 44.8 F | 13.8 Volt |
| 1734911804 | 610 Pkt | 90 Pkt | 30 Pck | 45.7 F | 13.8 Volt |
| 1734910604 | 580 Pkt | 89 Pkt | 10 Pck | 44.8 F | 13.8 Volt |
| 1734909404 | 610 Pkt | 86 Pkt | 10 Pck | 44.8 F | 13.8 Volt |
| 1734908204 | 620 Pkt | 103 Pkt | 10 Pck | 44.8 F | 13.8 Volt |
| 1734907004 | 600 Pkt | 109 Pkt | 10 Pck | 44.8 F | 13.8 Volt |
| 1734905804 | 580 Pkt | 85 Pkt | 20 Pck | 44.8 F | 13.8 Volt |
| 1734904605 | 600 Pkt | 95 Pkt | 20 Pck | 44.8 F | 13.8 Volt |
| 1734903404 | 630 Pkt | 87 Pkt | 20 Pck | 44.8 F | 13.8 Volt |
| 1734902204 | 660 Pkt | 96 Pkt | 20 Pck | 44.8 F | 13.8 Volt |
| 1734901005 | 690 Pkt | 107 Pkt | 20 Pck | 44.8 F | 13.8 Volt |
| 1734899804 | 690 Pkt | 111 Pkt | 20 Pck | 44.8 F | 13.8 Volt |
| 1734897404 | 600 Pkt | 103 Pkt | 20 Pck | 44.8 F | 13.8 Volt |
| 1734896204 | 550 Pkt | 85 Pkt | 20 Pck | 44.8 F | 13.8 Volt |
| 1734895004 | 570 Pkt | 92 Pkt | 10 Pck | 44.8 F | 13.8 Volt |
| 1734893804 | 590 Pkt | 80 Pkt | 10 Pck | 44.8 F | 13.8 Volt |
| 1734892604 | 600 Pkt | 98 Pkt | 10 Pck | 44.8 F | 13.8 Volt |
*Used Equation Coefficients:
Rx1h: 0, 10, 0
Rx10m: 0, 1, 0
Dig1h: 0, 10, 0
Temp: 0, 0.9, -83
Vin: 0, 0.075, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)