RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

LZ0DAP-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ0DAP-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin:*	Rx1h*	EffTo*	Temp*
1734984779	14.32 Volt	150 Pkt	88 Pcnt	24.55 C
1734984179	14.32 Volt	150 Pkt	88 Pcnt	24.55 C
1734983579	14.32 Volt	140 Pkt	88 Pcnt	24.55 C
1734982979	14.32 Volt	140 Pkt	88 Pcnt	24.55 C
1734982379	14.32 Volt	140 Pkt	88 Pcnt	24.55 C
1734981779	14.32 Volt	140 Pkt	88 Pcnt	24.7 C
1734981179	14.32 Volt	140 Pkt	88 Pcnt	24.55 C
1734980579	14.32 Volt	140 Pkt	88 Pcnt	24.55 C
1734979979	14.32 Volt	150 Pkt	88 Pcnt	24.7 C
1734979379	14.32 Volt	150 Pkt	88 Pcnt	24.7 C
1734978780	14.32 Volt	150 Pkt	88 Pcnt	24.7 C
1734978179	14.32 Volt	160 Pkt	88 Pcnt	24.7 C
1734977579	14.32 Volt	180 Pkt	88 Pcnt	24.55 C
1734976980	14.32 Volt	180 Pkt	88 Pcnt	24.7 C
1734976380	14.32 Volt	170 Pkt	88 Pcnt	24.7 C
1734975780	14.32 Volt	180 Pkt	88 Pcnt	24.7 C
1734975180	14.32 Volt	180 Pkt	88 Pcnt	24.7 C
1734974580	14.32 Volt	170 Pkt	88 Pcnt	24.7 C
1734973980	14.32 Volt	150 Pkt	88 Pcnt	24.7 C
1734973380	14.32 Volt	150 Pkt	88 Pcnt	24.84 C
1734972780	14.32 Volt	160 Pkt	88 Pcnt	24.84 C
1734972180	14.32 Volt	170 Pkt	88 Pcnt	24.84 C
1734971580	14.32 Volt	180 Pkt	88 Pcnt	24.99 C
1734970980	14.32 Volt	190 Pkt	88 Pcnt	24.99 C
1734970380	14.32 Volt	200 Pkt	88 Pcnt	24.99 C

*Used Equation Coefficients:

Vin:: 0, 0.077, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

EffTo: 0, 1, 0

Temp: 0, 0.147, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)