RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

W5LND-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W5LND-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734925776	13.5 Volt	290 Pkt	70 Pkt	52 Pcnt
1734925476	13.43 Volt	300 Pkt	60 Pkt	53 Pcnt
1734925176	13.5 Volt	310 Pkt	70 Pkt	55 Pcnt
1734924878	13.5 Volt	300 Pkt	60 Pkt	55 Pcnt
1734924876	13.5 Volt	300 Pkt	60 Pkt	55 Pcnt
1734924576	13.5 Volt	320 Pkt	70 Pkt	57 Pcnt
1734924276	13.5 Volt	320 Pkt	60 Pkt	57 Pcnt
1734924276	13.5 Volt	320 Pkt	60 Pkt	57 Pcnt
1734923976	13.5 Volt	320 Pkt	60 Pkt	56 Pcnt
1734923679	13.43 Volt	310 Pkt	60 Pkt	59 Pcnt
1734923676	13.43 Volt	310 Pkt	60 Pkt	59 Pcnt
1734923076	13.5 Volt	310 Pkt	60 Pkt	58 Pcnt
1734923076	13.5 Volt	310 Pkt	60 Pkt	58 Pcnt
1734922776	12.75 Volt	300 Pkt	60 Pkt	57 Pcnt
1734922476	13.5 Volt	280 Pkt	60 Pkt	55 Pcnt
1734922476	13.5 Volt	280 Pkt	60 Pkt	55 Pcnt
1734922176	13.5 Volt	270 Pkt	60 Pkt	53 Pcnt
1734921879	12.68 Volt	250 Pkt	50 Pkt	51 Pcnt
1734921876	12.68 Volt	250 Pkt	50 Pkt	51 Pcnt
1734921576	13.5 Volt	240 Pkt	50 Pkt	50 Pcnt
1734921283	13.43 Volt	210 Pkt	50 Pkt	47 Pcnt
1734921276	13.43 Volt	210 Pkt	50 Pkt	47 Pcnt
1734920976	13.5 Volt	200 Pkt	40 Pkt	46 Pcnt
1734920676	13.5 Volt	200 Pkt	40 Pkt	48 Pcnt
1734920676	13.5 Volt	200 Pkt	40 Pkt	48 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)