RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

SR8RJS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR8RJS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10min*	Rx1h*	EfTot*
1734936489	14.3 Volt	80 Pkt	50 Pkt	87 Pcnt
1734930189	14.3 Volt	80 Pkt	40 Pkt	86 Pcnt
1734929289	14.3 Volt	50 Pkt	40 Pkt	85 Pcnt
1734928389	14.3 Volt	110 Pkt	40 Pkt	85 Pcnt
1734927489	14.3 Volt	60 Pkt	40 Pkt	86 Pcnt
1734926589	14.3 Volt	70 Pkt	60 Pkt	86 Pcnt
1734925689	14.3 Volt	90 Pkt	60 Pkt	86 Pcnt
1734924790	14.3 Volt	70 Pkt	70 Pkt	85 Pcnt
1734923890	14.3 Volt	110 Pkt	90 Pkt	84 Pcnt
1734922990	14.3 Volt	130 Pkt	70 Pkt	81 Pcnt
1734922090	14.3 Volt	100 Pkt	50 Pkt	78 Pcnt
1734921190	14.3 Volt	200 Pkt	30 Pkt	77 Pcnt
1734920290	14.3 Volt	50 Pkt	0 Pkt	76 Pcnt
1734919690	14.3 Volt	20 Pkt	0 Pkt	100 Pcnt
1734918485	14.3 Volt	90 Pkt	50 Pkt	63 Pcnt
1734917586	14.3 Volt	80 Pkt	50 Pkt	63 Pcnt
1734916685	14.3 Volt	70 Pkt	50 Pkt	62 Pcnt
1734915788	14.3 Volt	90 Pkt	40 Pkt	62 Pcnt
1734914888	14.3 Volt	60 Pkt	40 Pkt	62 Pcnt
1734913986	14.3 Volt	100 Pkt	50 Pkt	62 Pcnt
1734913086	14.3 Volt	60 Pkt	40 Pkt	62 Pcnt
1734912186	14.3 Volt	90 Pkt	40 Pkt	61 Pcnt
1734911286	14.3 Volt	80 Pkt	40 Pkt	61 Pcnt
1734910386	14.3 Volt	40 Pkt	30 Pkt	61 Pcnt
1734909486	14.3 Volt	30 Pkt	40 Pkt	61 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx10min: 0, 10, 0

Rx1h: 0, 10, 0

DIG10m: 0, 1, 0

EfTot: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)