RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

E22KKC-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22KKC-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1734902818	12 Pkt	0 Pkt	0 Pkt	-46 dBm	0.08 V
1734900992	20 Pkt	0 Pkt	0 Pkt	-47 dBm	0.08 V
1734899167	20 Pkt	0 Pkt	0 Pkt	-47 dBm	0.08 V
1734897341	19 Pkt	0 Pkt	0 Pkt	-45 dBm	0.08 V
1734895515	27 Pkt	0 Pkt	0 Pkt	-47 dBm	0.08 V
1734893689	19 Pkt	1 Pkt	2 Pkt	-47 dBm	0.08 V
1734891864	34 Pkt	0 Pkt	0 Pkt	-48 dBm	0.08 V
1734890038	22 Pkt	0 Pkt	0 Pkt	-46 dBm	0.08 V
1734888213	16 Pkt	0 Pkt	0 Pkt	-46 dBm	0.08 V
1734886387	20 Pkt	0 Pkt	0 Pkt	-45 dBm	0.08 V
1734884562	19 Pkt	0 Pkt	0 Pkt	-47 dBm	0.1 V
1734882737	24 Pkt	0 Pkt	0 Pkt	-45 dBm	0.08 V
1734880912	22 Pkt	0 Pkt	0 Pkt	-45 dBm	0.08 V
1734879086	28 Pkt	0 Pkt	0 Pkt	-46 dBm	0.08 V
1734877261	2 Pkt	0 Pkt	0 Pkt	-46 dBm	0.08 V
1734875800	24 Pkt	0 Pkt	0 Pkt	-46 dBm	0.08 V
1734873975	25 Pkt	0 Pkt	0 Pkt	-46 dBm	0.08 V
1734872149	20 Pkt	0 Pkt	0 Pkt	-46 dBm	0.08 V
1734870323	27 Pkt	0 Pkt	0 Pkt	-46 dBm	0.08 V
1734868497	21 Pkt	0 Pkt	0 Pkt	-47 dBm	0.08 V
1734866671	31 Pkt	0 Pkt	0 Pkt	-47 dBm	0.08 V
1734864846	22 Pkt	0 Pkt	0 Pkt	-44 dBm	0.08 V
1734863019	14 Pkt	0 Pkt	0 Pkt	-47 dBm	0.08 V
1734861194	16 Pkt	0 Pkt	0 Pkt	-42 dBm	0.08 V
1734859368	20 Pkt	0 Pkt	0 Pkt	-47 dBm	0.08 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)