RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

TA5LVC-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA5LVC-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1735148191	14 Pkt	4 Pkt	1 Pkt	-51 dBm	0.57 V
1735147461	16 Pkt	3 Pkt	1 Pkt	-53 dBm	0.57 V
1735146731	14 Pkt	4 Pkt	1 Pkt	-52 dBm	0.55 V
1735146001	18 Pkt	1 Pkt	0 Pkt	-52 dBm	0.55 V
1735145271	13 Pkt	1 Pkt	2 Pkt	-50 dBm	0.55 V
1735144541	21 Pkt	4 Pkt	0 Pkt	-54 dBm	0.55 V
1735143811	10 Pkt	2 Pkt	1 Pkt	-53 dBm	0.64 V
1735143081	30 Pkt	1 Pkt	1 Pkt	-54 dBm	0.57 V
1735142351	17 Pkt	0 Pkt	0 Pkt	-53 dBm	0.57 V
1735142093	39 Pkt	3 Pkt	1 Pkt	-53 dBm	0.57 V
1735141363	18 Pkt	4 Pkt	2 Pkt	-53 dBm	0.55 V
1735140633	15 Pkt	1 Pkt	0 Pkt	-53 dBm	0.57 V
1735139903	26 Pkt	1 Pkt	0 Pkt	-53 dBm	0.57 V
1735139173	29 Pkt	4 Pkt	2 Pkt	-53 dBm	0.55 V
1735138443	5 Pkt	0 Pkt	0 Pkt	-53 dBm	0.55 V
1735137640	25 Pkt	8 Pkt	0 Pkt	-54 dBm	0.55 V
1735137088	28 Pkt	3 Pkt	1 Pkt	-54 dBm	0.57 V
1735136371	21 Pkt	7 Pkt	1 Pkt	-54 dBm	0.55 V
1735135450	25 Pkt	11 Pkt	1 Pkt	-54 dBm	0.55 V
1735134720	26 Pkt	7 Pkt	1 Pkt	-55 dBm	0.55 V
1735133990	15 Pkt	12 Pkt	0 Pkt	-53 dBm	0.55 V
1735133260	20 Pkt	9 Pkt	2 Pkt	-54 dBm	0.55 V
1735132530	26 Pkt	8 Pkt	0 Pkt	-54 dBm	0.55 V
1735131800	16 Pkt	8 Pkt	0 Pkt	-53 dBm	0.55 V
1735131070	13 Pkt	7 Pkt	1 Pkt	-53 dBm	0.57 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)