This is the latest recevied telemetry packets stored in our database for station/object N374RS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719410751 | 478 | 635 | 0 | 0 | 0 |
1719410655 | 483 | 633 | 0 | 0 | 0 |
1719410611 | 479 | 634 | 0 | 0 | 0 |
1719410521 | 475 | 633 | 0 | 0 | 0 |
1719410431 | 483 | 633 | 0 | 0 | 0 |
1719410342 | 480 | 632 | 0 | 0 | 0 |
1719410305 | 481 | 632 | 0 | 0 | 0 |
1719410252 | 481 | 632 | 0 | 0 | 0 |
1719410236 | 481 | 632 | 0 | 0 | 0 |
1719410162 | 481 | 632 | 0 | 0 | 0 |
1719410121 | 480 | 632 | 0 | 0 | 0 |
1719410073 | 481 | 632 | 0 | 0 | 0 |
1719410017 | 483 | 631 | 0 | 0 | 0 |
1719409983 | 481 | 632 | 0 | 0 | 0 |
1719409979 | 483 | 631 | 0 | 0 | 0 |
1719409970 | 483 | 631 | 0 | 0 | 0 |
1719409941 | 483 | 631 | 0 | 0 | 0 |
1719409894 | 481 | 632 | 0 | 0 | 0 |
1719409822 | 483 | 631 | 0 | 0 | 0 |
1719409804 | 480 | 632 | 0 | 0 | 0 |
1719409714 | 483 | 631 | 0 | 0 | 0 |
1719409695 | 483 | 631 | 0 | 0 | 0 |
1719409685 | 483 | 631 | 0 | 0 | 0 |
1719409677 | 483 | 631 | 0 | 0 | 0 |
1719409669 | 483 | 631 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)