RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

KC0EQQ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC0EQQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1734971136	13.95 Volt	160 Pkt	80 Pkt	76 Pcnt
1734971135	13.95 Volt	160 Pkt	80 Pkt	76 Pcnt
1734970235	13.95 Volt	170 Pkt	80 Pkt	75 Pcnt
1734969335	13.95 Volt	180 Pkt	80 Pkt	76 Pcnt
1734968435	13.95 Volt	190 Pkt	80 Pkt	76 Pcnt
1734967537	13.95 Volt	180 Pkt	70 Pkt	76 Pcnt
1734967535	13.95 Volt	180 Pkt	70 Pkt	76 Pcnt
1734966635	13.95 Volt	160 Pkt	60 Pkt	76 Pcnt
1734965735	13.95 Volt	160 Pkt	50 Pkt	78 Pcnt
1734964835	13.95 Volt	160 Pkt	50 Pkt	80 Pcnt
1734963935	13.95 Volt	160 Pkt	50 Pkt	83 Pcnt
1734963035	13.95 Volt	150 Pkt	60 Pkt	82 Pcnt
1734962135	13.95 Volt	160 Pkt	60 Pkt	84 Pcnt
1734961235	13.95 Volt	150 Pkt	50 Pkt	82 Pcnt
1734960335	13.95 Volt	150 Pkt	50 Pkt	80 Pcnt
1734959435	13.95 Volt	160 Pkt	50 Pkt	83 Pcnt
1734958535	13.95 Volt	170 Pkt	50 Pkt	85 Pcnt
1734957635	13.95 Volt	190 Pkt	50 Pkt	85 Pcnt
1734956737	13.95 Volt	190 Pkt	50 Pkt	86 Pcnt
1734956735	13.95 Volt	190 Pkt	50 Pkt	86 Pcnt
1734955835	13.95 Volt	190 Pkt	50 Pkt	85 Pcnt
1734954935	13.95 Volt	170 Pkt	50 Pkt	86 Pcnt
1734954035	13.95 Volt	160 Pkt	40 Pkt	85 Pcnt
1734953135	13.95 Volt	150 Pkt	40 Pkt	86 Pcnt
1734952235	13.95 Volt	140 Pkt	40 Pkt	83 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

CRNT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)