This is the latest recevied telemetry packets stored in our database for station/object KD7RUS-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1736386064 | 460 | 649 | 0 | 0 | 0 |
| 1736385944 | 469 | 649 | 0 | 0 | 0 |
| 1736385824 | 463 | 650 | 0 | 0 | 0 |
| 1736385464 | 459 | 646 | 0 | 0 | 0 |
| 1736385344 | 461 | 641 | 0 | 0 | 0 |
| 1736385224 | 462 | 635 | 0 | 0 | 0 |
| 1736385104 | 461 | 628 | 0 | 0 | 0 |
| 1736384984 | 425 | 623 | 0 | 0 | 0 |
| 1736383549 | 451 | 646 | 0 | 0 | 0 |
| 1736383429 | 463 | 643 | 0 | 0 | 0 |
| 1736383310 | 442 | 641 | 0 | 0 | 0 |
| 1736383190 | 423 | 641 | 0 | 0 | 0 |
| 1736383070 | 458 | 641 | 0 | 0 | 0 |
| 1736382950 | 455 | 641 | 0 | 0 | 0 |
| 1736382830 | 455 | 642 | 0 | 0 | 0 |
| 1736382710 | 455 | 643 | 0 | 0 | 0 |
| 1736382522 | 459 | 642 | 0 | 0 | 0 |
| 1736382470 | 458 | 643 | 0 | 0 | 0 |
| 1736382351 | 459 | 642 | 0 | 0 | 0 |
| 1736382230 | 463 | 641 | 0 | 0 | 0 |
| 1736382110 | 461 | 639 | 0 | 0 | 0 |
| 1736381871 | 474 | 628 | 0 | 0 | 0 |
| 1736381750 | 482 | 617 | 0 | 0 | 0 |
| 1736381630 | 483 | 609 | 0 | 0 | 0 |
| 1736381391 | 486 | 599 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)