RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

PU4AAP-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PU4AAP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1735007089	15 Pkt	2 Pkt	3 Pkt	-43 dBm	0.16 V
1735006465	16 Pkt	6 Pkt	6 Pkt	-55 dBm	0.16 V
1735005840	13 Pkt	10 Pkt	4 Pkt	-57 dBm	0.16 V
1735005215	21 Pkt	5 Pkt	6 Pkt	-54 dBm	0.16 V
1735004590	19 Pkt	8 Pkt	6 Pkt	-50 dBm	0.16 V
1735003966	17 Pkt	2 Pkt	8 Pkt	-49 dBm	0.16 V
1735003341	19 Pkt	0 Pkt	7 Pkt	-51 dBm	0.16 V
1735002716	57 Pkt	0 Pkt	8 Pkt	-53 dBm	0.16 V
1735002090	22 Pkt	0 Pkt	8 Pkt	-49 dBm	0.16 V
1735001465	17 Pkt	0 Pkt	12 Pkt	-54 dBm	0.16 V
1735000840	21 Pkt	0 Pkt	10 Pkt	-43 dBm	0.16 V
1735000216	13 Pkt	0 Pkt	5 Pkt	-57 dBm	0.16 V
1734999591	11 Pkt	0 Pkt	3 Pkt	-53 dBm	0.16 V
1734998967	15 Pkt	0 Pkt	0 Pkt	-45 dBm	0.16 V
1734998335	15 Pkt	1 Pkt	1 Pkt	-52 dBm	0.16 V
1734997708	16 Pkt	0 Pkt	1 Pkt	-57 dBm	0.16 V
1734997082	40 Pkt	0 Pkt	2 Pkt	-46 dBm	0.16 V
1734996457	21 Pkt	0 Pkt	1 Pkt	-43 dBm	0.16 V
1734995832	14 Pkt	0 Pkt	0 Pkt	-42 dBm	0.16 V
1734995207	22 Pkt	6 Pkt	3 Pkt	-43 dBm	0.16 V
1734994582	16 Pkt	0 Pkt	0 Pkt	-47 dBm	0.16 V
1734993958	21 Pkt	0 Pkt	0 Pkt	-46 dBm	0.16 V
1734993334	15 Pkt	2 Pkt	0 Pkt	-38 dBm	0.16 V
1734992708	10 Pkt	0 Pkt	1 Pkt	-40 dBm	0.16 V
1734992084	17 Pkt	0 Pkt	1 Pkt	-44 dBm	0.16 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)