RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

WR7DW-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WR7DW-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1731349277	13.05 Volt	480 Pkt	200 Pkt	89 Pcnt
1731345677	12.98 Volt	430 Pkt	190 Pkt	88 Pcnt
1731342078	12.98 Volt	480 Pkt	210 Pkt	89 Pcnt
1731338478	12.98 Volt	460 Pkt	180 Pkt	89 Pcnt
1731334879	12.98 Volt	440 Pkt	170 Pkt	90 Pcnt
1731331278	12.98 Volt	380 Pkt	150 Pkt	91 Pcnt
1731327678	12.98 Volt	400 Pkt	150 Pkt	92 Pcnt
1731324078	12.98 Volt	400 Pkt	160 Pkt	90 Pcnt
1731320482	12.98 Volt	460 Pkt	190 Pkt	87 Pcnt
1731316880	12.98 Volt	460 Pkt	190 Pkt	85 Pcnt
1731313278	13.05 Volt	450 Pkt	200 Pkt	86 Pcnt
1731309678	13.05 Volt	480 Pkt	220 Pkt	86 Pcnt
1731306083	13.05 Volt	440 Pkt	210 Pkt	88 Pcnt
1731298880	13.05 Volt	410 Pkt	190 Pkt	90 Pcnt
1731291685	13.05 Volt	420 Pkt	170 Pkt	90 Pcnt
1731288080	13.05 Volt	460 Pkt	190 Pkt	89 Pcnt
1731284482	13.13 Volt	460 Pkt	220 Pkt	86 Pcnt
1731280879	13.13 Volt	540 Pkt	240 Pkt	91 Pcnt
1731277279	13.2 Volt	500 Pkt	210 Pkt	91 Pcnt
1731273681	13.28 Volt	500 Pkt	180 Pkt	90 Pcnt
1731270082	13.28 Volt	440 Pkt	160 Pkt	92 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)