RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

LW8EXS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LW8EXS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1735191094	0 Pkt	-56 dBm	12.9 V
1735190172	0 Pkt	-56 dBm	12.9 V
1735189250	0 Pkt	-57 dBm	12.9 V
1735188328	0 Pkt	-57 dBm	12.9 V
1735187406	0 Pkt	-55 dBm	12.9 V
1735186484	0 Pkt	-55 dBm	12.9 V
1735185562	0 Pkt	-56 dBm	12.9 V
1735184640	0 Pkt	-56 dBm	12.9 V
1735183718	0 Pkt	-54 dBm	12.9 V
1735182796	0 Pkt	-53 dBm	12.9 V
1735181874	0 Pkt	-56 dBm	12.9 V
1735180952	0 Pkt	-54 dBm	12.88 V
1735180030	0 Pkt	-54 dBm	12.88 V
1735179108	0 Pkt	-53 dBm	12.88 V
1735178186	1 Pkt	-54 dBm	12.9 V
1735177264	0 Pkt	-53 dBm	12.88 V
1735176342	0 Pkt	-59 dBm	12.86 V
1735175420	0 Pkt	-54 dBm	12.88 V
1735174498	0 Pkt	-56 dBm	12.88 V
1735173576	0 Pkt	-60 dBm	12.88 V
1735172654	0 Pkt	-56 dBm	12.88 V
1735171732	0 Pkt	-59 dBm	12.88 V
1735170810	0 Pkt	-55 dBm	12.88 V
1735169888	0 Pkt	-51 dBm	12.88 V
1735168966	0 Pkt	-55 dBm	12.9 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)