RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

UCAPK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object UCAPK. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	DgS1h*	Eff1h*
1734923723	13.8 Volt	30 Pkt	10.39 Pcnt	48 Pcnt
1734923123	13.95 Volt	30 Pkt	11.27 Pcnt	52 Pcnt
1734922823	13.95 Volt	30 Pkt	11.43 Pcnt	54 Pcnt
1734922523	13.95 Volt	30 Pkt	12.31 Pcnt	50 Pcnt
1734922223	13.95 Volt	30 Pkt	12.16 Pcnt	48 Pcnt
1734921923	13.95 Volt	30 Pkt	14.08 Pcnt	53 Pcnt
1734921623	13.95 Volt	30 Pkt	13.51 Pcnt	52 Pcnt
1734921323	13.95 Volt	40 Pkt	14.1 Pcnt	53 Pcnt
1734921023	13.95 Volt	40 Pkt	15 Pcnt	56 Pcnt
1734920723	13.88 Volt	40 Pkt	16.46 Pcnt	58 Pcnt
1734920423	13.95 Volt	40 Pkt	16.88 Pcnt	61 Pcnt
1734920123	13.95 Volt	40 Pkt	16.67 Pcnt	61 Pcnt
1734919823	13.95 Volt	40 Pkt	16.05 Pcnt	58 Pcnt
1734919523	13.95 Volt	40 Pkt	15.48 Pcnt	58 Pcnt
1734919223	13.95 Volt	40 Pkt	14.94 Pcnt	55 Pcnt
1734918923	13.95 Volt	40 Pkt	15.12 Pcnt	55 Pcnt
1734918623	13.95 Volt	50 Pkt	14.13 Pcnt	56 Pcnt
1734918323	13.95 Volt	50 Pkt	14.29 Pcnt	58 Pcnt
1734918023	13.95 Volt	50 Pkt	15.12 Pcnt	59 Pcnt
1734917723	13.95 Volt	40 Pkt	14.46 Pcnt	59 Pcnt
1734917423	13.95 Volt	40 Pkt	14.46 Pcnt	59 Pcnt
1734917123	13.95 Volt	40 Pkt	14.63 Pcnt	58 Pcnt
1734916823	13.95 Volt	40 Pkt	14.12 Pcnt	57 Pcnt
1734916523	13.95 Volt	50 Pkt	14.94 Pcnt	58 Pcnt
1734916223	13.95 Volt	50 Pkt	14.94 Pcnt	57 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

DgS1h: 0, 0.001, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)