This is the latest recevied telemetry packets stored in our database for station/object F5ZHS-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Temp* | A3* | A4* | A5* |
---|---|---|---|---|---|
1716670982 | 13.19 Volt | 16.5 C | 0 | 0 Pcnt | 0 None |
1716670981 | 13.19 Volt | 16.5 C | 0 | 0 Pcnt | 0 None |
1716668879 | 13.27 Volt | 16.5 C | 0 | 0 Pcnt | 0 None |
1716668879 | 13.27 Volt | 16.5 C | 0 | 0 Pcnt | 0 None |
1716666778 | 13.19 Volt | 18 C | 0 | 0 Pcnt | 0 None |
1716666777 | 13.19 Volt | 18 C | 0 | 0 Pcnt | 0 None |
1716664676 | 13.19 Volt | 19 C | 0 | 0 Pcnt | 0 None |
1716664675 | 13.19 Volt | 19 C | 0 | 0 Pcnt | 0 None |
1716662574 | 13.19 Volt | 20 C | 0 | 0 Pcnt | 0 None |
1716662573 | 13.19 Volt | 20 C | 0 | 0 Pcnt | 0 None |
1716660472 | 13.19 Volt | 21.5 C | 0 | 0 Pcnt | 0 None |
1716660471 | 13.19 Volt | 21.5 C | 0 | 0 Pcnt | 0 None |
1716658370 | 13.27 Volt | 22 C | 0 | 0 Pcnt | 0 None |
1716658369 | 13.27 Volt | 22 C | 0 | 0 Pcnt | 0 None |
1716656268 | 13.27 Volt | 23 C | 0 | 0 Pcnt | 0 None |
1716656267 | 13.27 Volt | 23 C | 0 | 0 Pcnt | 0 None |
1716654166 | 13.19 Volt | 24 C | 0 | 0 Pcnt | 0 None |
1716654165 | 13.19 Volt | 24 C | 0 | 0 Pcnt | 0 None |
1716652064 | 13.19 Volt | 23 C | 0 | 0 Pcnt | 0 None |
1716652063 | 13.19 Volt | 23 C | 0 | 0 Pcnt | 0 None |
1716649962 | 13.19 Volt | 23.5 C | 0 | 0 Pcnt | 0 None |
1716649961 | 13.19 Volt | 23.5 C | 0 | 0 Pcnt | 0 None |
1716647860 | 13.19 Volt | 23.5 C | 0 | 0 Pcnt | 0 None |
1716647859 | 13.19 Volt | 23.5 C | 0 | 0 Pcnt | 0 None |
1716645758 | 13.19 Volt | 22.5 C | 0 | 0 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Temp: 0, 0.5, -64
A3: 0, 0, 0
A4: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)