This is the latest recevied telemetry packets stored in our database for station/object LZ2SMX-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Tbsmt* | Rh* | Tfl1* | Tktcn* | Tloft* |
|---|---|---|---|---|---|
| 1734922672 | 12 C | 58 % | 10 C | 10 C | 5 C |
| 1734920989 | 12 C | 58 % | 10 C | 10 C | 5 C |
| 1734917627 | 12 C | 58 % | 10 C | 10 C | 6 C |
| 1734916784 | 12 C | 58 % | 10 C | 10 C | 6 C |
| 1734915944 | 12 C | 58 % | 10 C | 10 C | 6 C |
| 1734915093 | 12 C | 58 % | 10 C | 10 C | 5 C |
| 1734911729 | 12 C | 58 % | 10 C | 11 C | 6 C |
| 1734909205 | 12 C | 58 % | 10 C | 11 C | 6 C |
| 1734904990 | 12 C | 58 % | 10 C | 11 C | 6 C |
| 1734902467 | 12 C | 58 % | 10 C | 11 C | 6 C |
| 1734899944 | 12 C | 58 % | 10 C | 11 C | 6 C |
| 1734899103 | 12 C | 58 % | 10 C | 11 C | 6 C |
| 1734895729 | 12 C | 58 % | 10 C | 11 C | 6 C |
| 1734894888 | 12 C | 58 % | 9 C | 11 C | 6 C |
| 1734893206 | 12 C | 58 % | 10 C | 11 C | 6 C |
| 1734891524 | 12 C | 58 % | 11 C | 11 C | 7 C |
| 1734890683 | 12 C | 58 % | 11 C | 11 C | 7 C |
| 1734888991 | 12 C | 58 % | 11 C | 11 C | 7 C |
| 1734888149 | 12 C | 58 % | 11 C | 11 C | 7 C |
| 1734887309 | 12 C | 58 % | 11 C | 11 C | 7 C |
| 1734886467 | 12 C | 58 % | 10 C | 11 C | 7 C |
| 1734885628 | 12 C | 58 % | 11 C | 11 C | 7 C |
| 1734884787 | 12 C | 59 % | 11 C | 11 C | 7 C |
| 1734883103 | 12 C | 59 % | 11 C | 11 C | 7 C |
| 1734882262 | 12 C | 58 % | 11 C | 11 C | 7 C |
*Used Equation Coefficients:
Tbsmt: 0, 1, 0
Rh: 0, 1, 0
Tfl1: 0, 1, 0
Tktcn: 0, 1, 0
Tloft: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)