This is the latest recevied telemetry packets stored in our database for station/object OH5GWF-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719625596 | 155 | 212 | 123 | 0 | 0 |
1719623073 | 155 | 213 | 123 | 0 | 0 |
1719620550 | 155 | 213 | 123 | 0 | 0 |
1719618027 | 155 | 213 | 123 | 0 | 0 |
1719615505 | 155 | 213 | 123 | 0 | 0 |
1719612982 | 155 | 213 | 123 | 0 | 0 |
1719610459 | 156 | 213 | 123 | 0 | 0 |
1719607936 | 156 | 213 | 123 | 0 | 0 |
1719605413 | 156 | 214 | 122 | 0 | 0 |
1719602891 | 156 | 214 | 122 | 0 | 0 |
1719600368 | 157 | 214 | 122 | 0 | 0 |
1719597845 | 157 | 214 | 122 | 0 | 0 |
1719595322 | 157 | 214 | 122 | 0 | 0 |
1719592800 | 158 | 215 | 122 | 0 | 0 |
1719590276 | 158 | 215 | 122 | 0 | 0 |
1719587754 | 158 | 215 | 122 | 0 | 0 |
1719585231 | 158 | 216 | 121 | 0 | 0 |
1719582708 | 158 | 216 | 122 | 0 | 0 |
1719580185 | 158 | 216 | 121 | 0 | 0 |
1719577663 | 159 | 224 | 124 | 0 | 0 |
1719575140 | 159 | 225 | 125 | 0 | 0 |
1719572617 | 159 | 225 | 124 | 0 | 0 |
1719570094 | 159 | 225 | 124 | 0 | 0 |
1719567571 | 160 | 226 | 124 | 0 | 0 |
1719565048 | 160 | 226 | 124 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)