This is the latest recevied telemetry packets stored in our database for station/object 2M0SBP-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | V Raw* | DgR* | T-in* | T-out* |
---|---|---|---|---|---|
1716134047 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716133747 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716133447 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716133147 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716132847 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716132547 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716132247 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716131947 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716131647 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716131347 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716131047 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716130747 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716130447 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716130147 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716129847 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716129547 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716129247 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716128947 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716128647 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716128347 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716128047 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716127747 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716127447 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716127147 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
1716126847 | 12.3 Volt | 13.5 Volt | 100 Pcnt | -64 C | 0 C |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
V Raw: 0, 0.1, 0
DgR: 0, 0.001, 0
T-in: 0, 0.5, -64
T-out: 0, 0.5, -64
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)