This is the latest recevied telemetry packets stored in our database for station/object PU5RIS-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1735107515 | 0 | 0 | 157 | 5 | 140 |
| 1735106621 | 0 | 0 | 156 | 3 | 140 |
| 1735105728 | 0 | 0 | 156 | 3 | 140 |
| 1735104835 | 0 | 0 | 156 | 5 | 140 |
| 1735103942 | 0 | 0 | 156 | 5 | 140 |
| 1735103048 | 0 | 0 | 155 | 2 | 140 |
| 1735102155 | 0 | 0 | 155 | 5 | 140 |
| 1735101262 | 0 | 0 | 155 | 4 | 140 |
| 1735100369 | 0 | 0 | 155 | 4 | 140 |
| 1735099476 | 0 | 0 | 154 | 5 | 140 |
| 1735098583 | 0 | 0 | 154 | 5 | 140 |
| 1735097690 | 0 | 0 | 154 | 2 | 140 |
| 1735096797 | 0 | 0 | 154 | 5 | 140 |
| 1735095902 | 0 | 0 | 153 | 5 | 140 |
| 1735095010 | 0 | 0 | 153 | 5 | 140 |
| 1735094117 | 0 | 0 | 153 | 4 | 140 |
| 1735093224 | 0 | 0 | 153 | 3 | 140 |
| 1735092370 | 0 | 0 | 153 | 4 | 140 |
| 1735091832 | 0 | 0 | 152 | 4 | 140 |
| 1735090938 | 0 | 0 | 152 | 2 | 140 |
| 1735090046 | 0 | 0 | 152 | 6 | 140 |
| 1735089150 | 0 | 0 | 151 | 4 | 140 |
| 1735088258 | 0 | 0 | 151 | 6 | 140 |
| 1735087366 | 0 | 0 | 151 | 3 | 140 |
| 1735086474 | 0 | 0 | 151 | 3 | 140 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)