This is the latest recevied telemetry packets stored in our database for station/object KB1IKN-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1718485747 | 148 | 156 | 81 | 0 | 0 |
1718480298 | 149 | 157 | 88 | 0 | 0 |
1718478482 | 149 | 158 | 93 | 0 | 0 |
1718476666 | 149 | 158 | 93 | 0 | 0 |
1718473033 | 149 | 157 | 76 | 0 | 0 |
1718471217 | 149 | 157 | 81 | 0 | 0 |
1718469401 | 149 | 156 | 70 | 0 | 0 |
1718467584 | 148 | 157 | 80 | 0 | 0 |
1718465768 | 148 | 156 | 74 | 0 | 0 |
1718463952 | 149 | 157 | 79 | 0 | 0 |
1718460319 | 149 | 157 | 77 | 0 | 0 |
1718458503 | 148 | 157 | 70 | 0 | 0 |
1718454871 | 149 | 157 | 76 | 0 | 0 |
1718453054 | 149 | 156 | 71 | 0 | 0 |
1718451238 | 149 | 157 | 72 | 0 | 0 |
1718449422 | 149 | 156 | 78 | 0 | 0 |
1718445789 | 149 | 156 | 77 | 0 | 0 |
1718443973 | 149 | 156 | 73 | 0 | 0 |
1718442157 | 149 | 156 | 76 | 0 | 0 |
1718440341 | 149 | 156 | 75 | 0 | 0 |
1718436708 | 149 | 156 | 69 | 0 | 0 |
1718434892 | 149 | 156 | 70 | 0 | 0 |
1718433075 | 149 | 156 | 77 | 0 | 0 |
1718431259 | 149 | 156 | 79 | 0 | 0 |
1718427627 | 149 | 156 | 77 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)