This is the latest recevied telemetry packets stored in our database for station/object IR6BC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | Dg/Rx* |
---|---|---|---|---|---|
1719391236 | 12.98 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 Pcnt |
1719390936 | 12.98 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 Pcnt |
1719390636 | 12.98 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 Pcnt |
1719390336 | 13.05 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 Pcnt |
1719390036 | 13.05 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 Pcnt |
1719389736 | 13.05 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 Pcnt |
1719389436 | 13.05 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 Pcnt |
1719389136 | 13.05 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 Pcnt |
1719388836 | 13.05 Volt | 0 Pkt | 0 Pkt | 1 Pcnt | 100 Pcnt |
1719388536 | 13.05 Volt | 0 Pkt | 0 Pkt | 1 Pcnt | 100 Pcnt |
1719388236 | 13.05 Volt | 0 Pkt | 0 Pkt | 1 Pcnt | 100 Pcnt |
1719387936 | 13.05 Volt | 0 Pkt | 0 Pkt | 1 Pcnt | 100 Pcnt |
1719387636 | 13.05 Volt | 0 Pkt | 0 Pkt | 1 Pcnt | 100 Pcnt |
1719387336 | 13.05 Volt | 0 Pkt | 0 Pkt | 1 Pcnt | 100 Pcnt |
1719387036 | 13.05 Volt | 0 Pkt | 0 Pkt | 1 Pcnt | 100 Pcnt |
1719386736 | 13.05 Volt | 0 Pkt | 0 Pkt | 1 Pcnt | 100 Pcnt |
1719386436 | 13.05 Volt | 0 Pkt | 0 Pkt | 2 Pcnt | 100 Pcnt |
1719386136 | 13.05 Volt | 0 Pkt | 0 Pkt | 3 Pcnt | 100 Pcnt |
1719385836 | 13.05 Volt | 1 Pkt | 1 Pkt | 2 Pcnt | 100 Pcnt |
1719385536 | 13.05 Volt | 1 Pkt | 1 Pkt | 2 Pcnt | 100 Pcnt |
1719385236 | 12.98 Volt | 0 Pkt | 0 Pkt | 1 Pcnt | 100 Pcnt |
1719384936 | 13.05 Volt | 0 Pkt | 0 Pkt | 1 Pcnt | 100 Pcnt |
1719384636 | 13.05 Volt | 0 Pkt | 0 Pkt | 1 Pcnt | 100 Pcnt |
1719384336 | 13.05 Volt | 0 Pkt | 0 Pkt | 1 Pcnt | 100 Pcnt |
1719383736 | 13.05 Volt | 0 Pkt | 0 Pkt | 1 Pcnt | 100 Pcnt |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 1, 0
Dg1h: 0, 1, 0
Eff1h: 0, 1, 0
Dg/Rx: 0, 0.001, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)