RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

BU2GE-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BU2GE-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	CPUTemp*	DiGi*
1734938847	21.8 C	594 p
1734937646	22.3 C	533 p
1734936445	22.6 C	524 p
1734929245	22.3 C	404 p
1734928045	22.3 C	364 p
1734926845	22.9 C	343 p
1734925646	22.3 C	329 p
1734924446	22.3 C	316 p
1734922045	23.3 C	294 p
1734920846	21.9 C	283 p
1734919645	21.8 C	271 p
1734918445	23 C	256 p
1734917246	22.3 C	236 p
1734916045	22.4 C	192 p
1734914845	22.6 C	155 p
1734913645	21.8 C	143 p
1734912446	22.3 C	108 p
1734911245	21.8 C	82 p
1734910045	21.8 C	73 p
1734908845	21.8 C	58 p
1734907645	21.2 C	41 p
1734906446	21.6 C	27 p
1734905245	21.1 C	18 p
1734904045	20.6 C	8 p
1734902845	15.9 C	0 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)