This is the latest recevied telemetry packets stored in our database for station/object 9M2SMS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
|---|---|---|---|---|---|
| 1734979592 | 2 Pkt | 17 Pkt | 0 Pkt | -56 dBm | 0 V |
| 1734978366 | 5 Pkt | 17 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1734977141 | 6 Pkt | 17 Pkt | 0 Pkt | -58 dBm | 0 V |
| 1734975915 | 3 Pkt | 44 Pkt | 0 Pkt | -56 dBm | 0 V |
| 1734974689 | 1 Pkt | 24 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1734973466 | 1 Pkt | 29 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1734972238 | 5 Pkt | 18 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1734971012 | 7 Pkt | 14 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1734969788 | 3 Pkt | 20 Pkt | 0 Pkt | -56 dBm | 0 V |
| 1734968563 | 3 Pkt | 17 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1734967337 | 3 Pkt | 25 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1734966114 | 6 Pkt | 23 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1734964887 | 4 Pkt | 29 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1734963659 | 4 Pkt | 30 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1734962437 | 4 Pkt | 35 Pkt | 0 Pkt | -56 dBm | 0 V |
| 1734961207 | 3 Pkt | 29 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1734959983 | 5 Pkt | 24 Pkt | 0 Pkt | -59 dBm | 0 V |
| 1734958758 | 1 Pkt | 30 Pkt | 0 Pkt | -58 dBm | 0 V |
| 1734957530 | 1 Pkt | 28 Pkt | 1 Pkt | -57 dBm | 0 V |
| 1734956306 | 10 Pkt | 28 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1734955081 | 3 Pkt | 21 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1734953856 | 5 Pkt | 19 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1734952629 | 2 Pkt | 19 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1734951410 | 4 Pkt | 20 Pkt | 0 Pkt | -57 dBm | 0 V |
| 1734950177 | 3 Pkt | 19 Pkt | 0 Pkt | -56 dBm | 0 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)