This is the latest recevied telemetry packets stored in our database for station/object MB7UKB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU* | Used* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734984464 | 38.62 C | 205 MB | 0 | 0 | 0 |
| 1734982665 | 38.62 C | 204 MB | 0 | 0 | 0 |
| 1734980865 | 38.62 C | 203 MB | 0 | 0 | 0 |
| 1734979065 | 38.62 C | 202 MB | 0 | 0 | 0 |
| 1734977264 | 39.16 C | 203 MB | 0 | 0 | 0 |
| 1734975465 | 38.62 C | 200 MB | 0 | 0 | 0 |
| 1734973665 | 38.62 C | 204 MB | 0 | 0 | 0 |
| 1734971865 | 39.16 C | 207 MB | 0 | 0 | 0 |
| 1734970065 | 38.62 C | 204 MB | 0 | 0 | 0 |
| 1734968265 | 38.62 C | 201 MB | 0 | 0 | 0 |
| 1734966465 | 39.16 C | 205 MB | 0 | 0 | 0 |
| 1734964665 | 39.16 C | 202 MB | 0 | 0 | 0 |
| 1734962865 | 39.16 C | 201 MB | 0 | 0 | 0 |
| 1734961065 | 39.7 C | 207 MB | 0 | 0 | 0 |
| 1734959265 | 39.7 C | 205 MB | 0 | 0 | 0 |
| 1734957464 | 39.7 C | 205 MB | 0 | 0 | 0 |
| 1734955665 | 39.7 C | 204 MB | 0 | 0 | 0 |
| 1734953865 | 39.16 C | 205 MB | 0 | 0 | 0 |
| 1734952065 | 39.7 C | 204 MB | 0 | 0 | 0 |
| 1734950264 | 39.16 C | 201 MB | 0 | 0 | 0 |
| 1734948465 | 39.16 C | 203 MB | 0 | 0 | 0 |
| 1734946665 | 39.16 C | 201 MB | 0 | 0 | 0 |
| 1734944865 | 39.16 C | 201 MB | 0 | 0 | 0 |
| 1734943064 | 38.09 C | 202 MB | 0 | 0 | 0 |
| 1734941265 | 38.62 C | 203 MB | 0 | 0 | 0 |
*Used Equation Coefficients:
CPU: 0, 0.01, 0
Used: 0, 1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)