RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

9W2LOV-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2LOV-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RSSI*	Voltage*
1734983960	-58 dBm	0.1 V
1734983605	-55 dBm	0.1 V
1734983249	-56 dBm	0.1 V
1734982894	-57 dBm	0.1 V
1734982539	-55 dBm	0.1 V
1734982184	-56 dBm	0.1 V
1734981829	-56 dBm	0.1 V
1734981474	-56 dBm	0.1 V
1734981118	-55 dBm	0.1 V
1734980764	-58 dBm	0.08 V
1734980408	-57 dBm	0.1 V
1734980053	-55 dBm	0.1 V
1734979698	-56 dBm	0.1 V
1734979342	-56 dBm	0.1 V
1734978986	-54 dBm	0.1 V
1734978632	-56 dBm	0.1 V
1734978278	-58 dBm	0.12 V
1734977921	-56 dBm	0.1 V
1734977566	-55 dBm	0.1 V
1734977210	-57 dBm	0.1 V
1734976856	-58 dBm	0.1 V
1734976500	-57 dBm	0.12 V
1734976145	-56 dBm	0.1 V
1734975790	-56 dBm	0.1 V
1734975435	-57 dBm	0.1 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)