This is the latest recevied telemetry packets stored in our database for station/object W1WRA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Load* | FreeMem* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1734920997 | 60.37 | 0.2 | 293 | 0 | 0 |
| 1734920397 | 60.86 | 0.35 | 292 | 0 | 0 |
| 1734919796 | 58.91 | 0.13 | 293 | 0 | 0 |
| 1734919196 | 57.94 | 0.17 | 294 | 0 | 0 |
| 1734918596 | 58.43 | 0.12 | 293 | 0 | 0 |
| 1734917996 | 57.94 | 0.18 | 294 | 0 | 0 |
| 1734917396 | 58.91 | 0.14 | 295 | 0 | 0 |
| 1734916796 | 59.4 | 0.13 | 295 | 0 | 0 |
| 1734916196 | 61.35 | 0.14 | 296 | 0 | 0 |
| 1734915596 | 60.86 | 0.18 | 297 | 0 | 0 |
| 1734914996 | 60.86 | 0.18 | 297 | 0 | 0 |
| 1734914396 | 60.37 | 0.15 | 297 | 0 | 0 |
| 1734913796 | 60.37 | 0.22 | 298 | 0 | 0 |
| 1734913195 | 59.4 | 0.16 | 298 | 0 | 0 |
| 1734912595 | 59.89 | 0.12 | 298 | 0 | 0 |
| 1734911995 | 58.91 | 0.16 | 299 | 0 | 0 |
| 1734911395 | 59.4 | 0.16 | 299 | 0 | 0 |
| 1734910795 | 62.32 | 0.21 | 300 | 0 | 0 |
| 1734910195 | 58.91 | 0.16 | 300 | 0 | 0 |
| 1734909595 | 58.91 | 0.17 | 301 | 0 | 0 |
| 1734908995 | 59.89 | 0.16 | 301 | 0 | 0 |
| 1734908395 | 59.4 | 0.22 | 302 | 0 | 0 |
| 1734907794 | 58.43 | 0.13 | 303 | 0 | 0 |
| 1734907194 | 58.43 | 0.19 | 303 | 0 | 0 |
| 1734906594 | 59.89 | 0.16 | 303 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.001, 0
Load: 0, 0.001, 0
FreeMem: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)