This is the latest recevied telemetry packets stored in our database for station/object FW0690. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vcc* | RSSI* | Load* | IRed* | Visb* |
|---|---|---|---|---|---|
| 1734940779 | 3.49 V | -73 dBm | 5.6 % | 1024 u | 2560 u |
| 1734940419 | 3.49 V | -73 dBm | 5.6 % | 768 u | 1792 u |
| 1734940059 | 3.49 V | -73 dBm | 6 % | 768 u | 2048 u |
| 1734939699 | 3.49 V | -73 dBm | 6 % | 768 u | 2048 u |
| 1734939339 | 3.49 V | -73 dBm | 5.2 % | 512 u | 1792 u |
| 1734938979 | 3.49 V | -73 dBm | 5.2 % | 512 u | 1792 u |
| 1734938620 | 3.49 V | -74 dBm | 5.2 % | 512 u | 1536 u |
| 1734938259 | 3.49 V | -73 dBm | 6 % | 512 u | 1280 u |
| 1734937899 | 3.49 V | -75 dBm | 6 % | 512 u | 1024 u |
| 1734937539 | 3.49 V | -72 dBm | 6 % | 512 u | 1024 u |
| 1734937179 | 3.49 V | -72 dBm | 5.6 % | 256 u | 1024 u |
| 1734936819 | 3.49 V | -73 dBm | 5.6 % | 256 u | 768 u |
| 1734936459 | 3.49 V | -72 dBm | 6 % | 256 u | 512 u |
| 1734930339 | 3.49 V | -72 dBm | 6 % | 0 u | 0 u |
| 1734929979 | 3.49 V | -73 dBm | 5.2 % | 0 u | 0 u |
| 1734929619 | 3.49 V | -72 dBm | 5.2 % | 0 u | 0 u |
| 1734929259 | 3.49 V | -71 dBm | 5.2 % | 0 u | 0 u |
| 1734928899 | 3.49 V | -73 dBm | 6 % | 0 u | 0 u |
| 1734928539 | 3.49 V | -72 dBm | 6 % | 0 u | 0 u |
| 1734928179 | 3.49 V | -72 dBm | 5.2 % | 0 u | 0 u |
| 1734927819 | 3.49 V | -72 dBm | 5.6 % | 0 u | 0 u |
| 1734927459 | 3.49 V | -72 dBm | 5.2 % | 0 u | 0 u |
| 1734927099 | 3.49 V | -70 dBm | 6 % | 0 u | 0 u |
| 1734926739 | 3.49 V | -72 dBm | 6 % | 0 u | 0 u |
| 1734926379 | 3.49 V | -72 dBm | 6 % | 0 u | 0 u |
*Used Equation Coefficients:
Vcc: 0, 0.004, 2.5
RSSI: 0, -1, 0
Load: 0, 0.4, 0
IRed: 0, 256, 0
Visb: 0, 256, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)