RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VK4RBO-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RBO-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Rx1h*	Dg1h*	Eff1h*
1734918382	13.84 Volt	350 Pkt	120 Pkt	81 Pcnt
1734917782	13.84 Volt	340 Pkt	110 Pkt	79 Pcnt
1734917182	13.84 Volt	380 Pkt	120 Pkt	75 Pcnt
1734916588	13.84 Volt	430 Pkt	140 Pkt	71 Pcnt
1734915982	13.84 Volt	490 Pkt	150 Pkt	69 Pcnt
1734915382	13.84 Volt	590 Pkt	170 Pkt	69 Pcnt
1734914782	13.47 Volt	670 Pkt	170 Pkt	68 Pcnt
1734914182	13.84 Volt	760 Pkt	180 Pkt	66 Pcnt
1734913583	13.84 Volt	800 Pkt	170 Pkt	67 Pcnt
1734912995	13.84 Volt	840 Pkt	170 Pkt	66 Pcnt
1734912382	13.84 Volt	870 Pkt	170 Pkt	65 Pcnt
1734911783	13.84 Volt	880 Pkt	170 Pkt	64 Pcnt
1734911185	13.84 Volt	860 Pkt	160 Pkt	63 Pcnt
1734910582	13.84 Volt	870 Pkt	170 Pkt	64 Pcnt
1734909985	13.84 Volt	840 Pkt	170 Pkt	62 Pcnt
1734909387	13.84 Volt	820 Pkt	160 Pkt	61 Pcnt
1734908782	13.84 Volt	850 Pkt	160 Pkt	61 Pcnt
1734908182	13.84 Volt	860 Pkt	160 Pkt	60 Pcnt
1734907582	13.84 Volt	870 Pkt	160 Pkt	59 Pcnt
1734906983	13.84 Volt	910 Pkt	160 Pkt	60 Pcnt
1734906384	13.84 Volt	940 Pkt	160 Pkt	61 Pcnt
1734905784	13.84 Volt	920 Pkt	160 Pkt	61 Pcnt
1734905182	13.84 Volt	870 Pkt	160 Pkt	61 Pcnt
1734904582	13.84 Volt	830 Pkt	160 Pkt	62 Pcnt
1734903982	13.84 Volt	770 Pkt	160 Pkt	62 Pcnt

*Used Equation Coefficients:

Battery: 0, 0.074, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

NA: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)