RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

YU2DXB-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YU2DXB-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	DC*	VIEW*	USE*
1735139802	14.4 V	11 sat	13 sat
1735139613	14.4 V	10 sat	14 sat
1735139233	12.6 V	10 sat	11 sat
1735138853	12.9 V	10 sat	13 sat
1735138468	14.3 V	10 sat	13 sat
1735138277	14.3 V	9 sat	11 sat
1735138089	11.9 V	9 sat	7 sat
1735137839	12.1 V	9 sat	12 sat
1735137648	12.1 V	9 sat	13 sat
1735137457	12.1 V	9 sat	13 sat
1735137266	12.2 V	8 sat	12 sat
1735137074	12.2 V	8 sat	13 sat
1735136883	12.1 V	8 sat	13 sat
1735136692	12.1 V	9 sat	13 sat
1735136501	12.2 V	9 sat	13 sat
1735136309	12.2 V	9 sat	14 sat
1735136118	12.2 V	9 sat	13 sat
1735135927	12.2 V	9 sat	14 sat
1735135545	12.2 V	9 sat	13 sat
1735135163	12.1 V	9 sat	13 sat
1735134971	12.1 V	9 sat	12 sat

*Used Equation Coefficients:

DC: 0, 0.1, 0

DIGI: 0, 1, 0

DCD: 0, 1, 0

USE: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)