RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

WB6ETY-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WB6ETY-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Value1*	Value2*	Value3*	Value4*
1736600910	1378	695	370	71
1736599710	1370	697	370	70
1736598510	1370	699	370	69
1736597910	1373	700	365	68
1736597311	1373	701	365	67
1736596109	1370	704	376	66
1736594910	1370	707	370	65
1736594310	1370	708	376	64
1736593710	1370	709	376	63
1736592510	1373	713	381	62
1736591310	1370	717	386	61
1736590710	1370	719	386	60
1736590110	1370	722	386	59
1736588910	1366	725	386	58
1736587710	1378	730	386	57
1736587110	1370	732	386	56
1736586509	1370	734	386	55
1736585309	1370	740	392	54
1736584110	1370	743	397	53
1736583510	1372	744	397	52
1736582911	1370	745	402	51
1736581711	1373	748	397	50
1736580510	1370	749	397	49
1736579910	1366	750	397	48
1736579310	1373	750	392	47

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)