RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

E24KHS-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E24KHS-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1734929599	44 Pkt	0 Pkt	0 Pkt	-53 dBm	7.3 V
1734928674	52 Pkt	0 Pkt	0 Pkt	-53 dBm	7.3 V
1734927748	46 Pkt	0 Pkt	0 Pkt	-50 dBm	7.3 V
1734926823	66 Pkt	0 Pkt	0 Pkt	-56 dBm	7.3 V
1734926822	66 Pkt	0 Pkt	0 Pkt	-53 dBm	7.3 V
1734925895	36 Pkt	0 Pkt	0 Pkt	-45 dBm	7.3 V
1734925895	36 Pkt	0 Pkt	0 Pkt	-52 dBm	7.3 V
1734924969	85 Pkt	1 Pkt	0 Pkt	-49 dBm	7.3 V
1734924969	85 Pkt	1 Pkt	0 Pkt	-50 dBm	7.3 V
1734924040	10 Pkt	0 Pkt	0 Pkt	-51 dBm	7.3 V
1734923115	7 Pkt	1 Pkt	0 Pkt	-49 dBm	7.3 V
1734922190	24 Pkt	1 Pkt	1 Pkt	-49 dBm	7.3 V
1734921266	7 Pkt	0 Pkt	0 Pkt	-57 dBm	7.3 V
1734920341	0 Pkt	2 Pkt	1 Pkt	-51 dBm	7.3 V
1734919417	9 Pkt	0 Pkt	0 Pkt	-49 dBm	7.3 V
1734918492	22 Pkt	0 Pkt	0 Pkt	-51 dBm	7.3 V
1734917568	18 Pkt	0 Pkt	0 Pkt	-49 dBm	7.3 V
1734916642	11 Pkt	0 Pkt	0 Pkt	-50 dBm	7.3 V
1734915717	4 Pkt	0 Pkt	0 Pkt	-51 dBm	7.3 V
1734914793	0 Pkt	0 Pkt	0 Pkt	-52 dBm	7.3 V
1734913868	0 Pkt	0 Pkt	0 Pkt	-50 dBm	7.3 V
1734912944	2 Pkt	0 Pkt	0 Pkt	-51 dBm	7.3 V
1734912019	5 Pkt	0 Pkt	0 Pkt	-50 dBm	7.3 V
1734911094	0 Pkt	0 Pkt	0 Pkt	-56 dBm	7.3 V
1734910170	0 Pkt	0 Pkt	0 Pkt	-53 dBm	7.3 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)