RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

9M2HER Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M2HER. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	TxTraffic*	RSSI*	Voltage*
1734963634	32 Pkt	-75 dBm	5.25 V
1734962409	48 Pkt	-75 dBm	5.23 V
1734961183	68 Pkt	-77 dBm	5.25 V
1734959956	40 Pkt	-75 dBm	5.25 V
1734958729	55 Pkt	-75 dBm	5.27 V
1734957502	73 Pkt	-75 dBm	5.25 V
1734956275	51 Pkt	-78 dBm	5.25 V
1734955049	59 Pkt	-76 dBm	5.25 V
1734953821	58 Pkt	-78 dBm	5.25 V
1734952594	100 Pkt	-77 dBm	5.25 V
1734951366	67 Pkt	-76 dBm	5.25 V
1734950139	77 Pkt	-76 dBm	5.23 V
1734948913	78 Pkt	-77 dBm	5.27 V
1734947685	70 Pkt	-75 dBm	5.25 V
1734946458	73 Pkt	-75 dBm	5.25 V
1734945231	69 Pkt	-76 dBm	5.25 V
1734944006	96 Pkt	-75 dBm	5.25 V
1734942777	82 Pkt	-76 dBm	5.25 V
1734941550	86 Pkt	-76 dBm	5.25 V
1734940321	84 Pkt	-76 dBm	5.23 V
1734939093	90 Pkt	-76 dBm	5.25 V
1734937866	107 Pkt	-76 dBm	5.25 V
1734936638	80 Pkt	-75 dBm	5.25 V
1734929270	78 Pkt	-74 dBm	5.23 V
1734928042	66 Pkt	-76 dBm	5.23 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)