RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

VK5RPA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK5RPA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dig1h*	Eff1h*	Temp*
1734971159	13.73 Volt	3 Pkt	2 Pkt	71 Pcnt	18.5 C
1734969357	13.73 Volt	3 Pkt	2 Pkt	51 Pcnt	19 C
1734967555	13.73 Volt	3 Pkt	1 Pkt	48 Pcnt	19.5 C
1734965753	13.73 Volt	3 Pkt	1 Pkt	48 Pcnt	20 C
1734963952	13.73 Volt	3 Pkt	1 Pkt	57 Pcnt	20 C
1734962150	13.73 Volt	3 Pkt	1 Pkt	68 Pcnt	20.5 C
1734960348	13.73 Volt	2 Pkt	1 Pkt	60 Pcnt	21 C
1734958546	13.73 Volt	2 Pkt	1 Pkt	68 Pcnt	21.5 C
1734956745	13.73 Volt	2 Pkt	1 Pkt	88 Pcnt	21.5 C
1734954943	13.73 Volt	2 Pkt	1 Pkt	91 Pcnt	22 C
1734953141	13.73 Volt	2 Pkt	1 Pkt	100 Pcnt	23 C
1734949538	13.73 Volt	2 Pkt	1 Pkt	100 Pcnt	24 C
1734947736	13.73 Volt	2 Pkt	1 Pkt	100 Pcnt	25 C
1734945934	13.73 Volt	2 Pkt	1 Pkt	100 Pcnt	26.5 C
1734940529	14.18 Volt	2 Pkt	1 Pkt	100 Pcnt	29.5 C
1734938727	14.18 Volt	2 Pkt	1 Pkt	100 Pcnt	29 C
1734936926	14.18 Volt	2 Pkt	1 Pkt	100 Pcnt	29.5 C
1734929718	14.18 Volt	2 Pkt	2 Pkt	92 Pcnt	28.5 C
1734927917	14.18 Volt	2 Pkt	1 Pkt	100 Pcnt	28 C
1734926115	14.18 Volt	2 Pkt	1 Pkt	100 Pcnt	27 C
1734924313	14.18 Volt	2 Pkt	1 Pkt	100 Pcnt	26.5 C
1734922511	14.18 Volt	2 Pkt	1 Pkt	100 Pcnt	26 C
1734920710	14.18 Volt	2 Pkt	1 Pkt	100 Pcnt	25.5 C
1734918908	14.25 Volt	2 Pkt	1 Pkt	92 Pcnt	25 C
1734917106	14.4 Volt	2 Pkt	1 Pkt	88 Pcnt	24 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 1, 0

Dig1h: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -62

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)